Norlund 78 Hood, the Finished Project

This is a project I started quite a while ago; it's been almost two years since I drafted the mockup (April of 2014).  I had to wait until I got around to making the Dungiven doublet first, because I was using the same fabric.  Anyways; this project is a slightly scaled recreation of the Norlund 78--Museum No. D10606--hood, from a Norse settlement in Greenland.  It is my entry into the Historical Sew Monthly (link to the right) Protection Challenge.

 The Find:

This garment I chose was one of a number found at Herjolfsnes, the Norse settlement in Greenland, as part of an archaeological excavation by Poul Norlund, starting in 1921.  From what I can tell in Woven Into the Earth--my main source of material--the body it was buried with decomposed to the point of uselessness, but it was found with what may have been a child sized shroud [WitE, pp. 215].  It is a vadmal sewn hood, with a liripipe, and extremely short cape.

14th Century Women's Hood: Documentation

Finished Hood.

Garment Description:

This piece is a 14^th Century woman’s open hood, in a style appropriate for the early to mid 1300s.  This style of hood—rather than pulling on over the head as earlier and men’s versions do—buttons up the front, allowing it to be worn open in warmer weather, often folded back.  It is a fairly standard liripipe hood design—fairly fitted and having a short mantle, with a tail (the liripipe) running from the back of the hood.

 

The find and sources:

I decided to not duplicate a period piece for this project.  However, much of my inspiration came from the London Hood, which I patterned the construction off of[i].  In addition, some of the dimensions (most notably the circumference of the hem) and construction is from the Greenland find.  While mid century examples tend to be shorter and tighter than earlier ones, I also took the colder climate into consideration—upon discussing this project with another apprentice--, I tried to design the hood so that the mantle would cover the neckline of the recipient’s dresses in cold weather.

 

 

Pieces of the Garment:

The construction is fairly simple, being only four pieces (times two, if you count the flat-lining).  These consist of: the main body, which is roughly rectangular, with pieces missing for shaping (removed from under the chin, and rounding in at the back of the head); two gores which are set above each shoulder; and a liripipe.  Looking at period examples[ii] you can see that the liripipe is usually cut as a separate piece from the main hood.

 

Research Dump: No. 3

Containing: Medieval Clothing (Including Medieval Garments Reconstructed!), Antler combs, Russian composite bows, 15th Century Italian clothing, and archaeological...stuff.

Norlund 78, or D10606 Hood: part 2...Mockup

Warning: Contains far too many numbers.  Continued from Part One

With the rough pattern figured  out, it was time to draft out the full scale mockup.  I decided that the best way to do so was to start with a straight base line, to the left of what would become the pattern, measure to the right from that, and essentially connect the dots.

Edited to add, at 11:33 5-5-14

The process was to draw a straight line, 405.9mm long (the height of the hood, plus the extra little bit for the "horn"). 
320mm from the top, I made a mark 15mm from the line--this is the chin, where it slanted in slightly.  Another 95mm in, beyond the chin, another mark was made, and the two points get connected (as does the front opening of the hood).
Going back to your baseline, at the bottom I marked in by 45mm, and connected slantwise to the mark above.

Norlund 78, or D10606 Hood: part 1...First Draft

I woke up today with a project (two, actually) working through my head...one of the hoods found at the Norse settlements of Greenland.  This hood--labeled D10606--is a liripipe, Norlund type II. 

It has an extremely short cape, only a few inches wide, with the gores over the shoulder.  Unlike some examples from the main land, it does not button close to the neck.  The extant hood is 400mm tall (from hem to top seam), with a 695mm long liripipe.  The fabric, while now Bog Trash Brown (or a variant, anyways), was sewn in a vadmal which was light grey with a white weft.  The hood, like many of the ones found, rises to a "horn" in the front.  Norlund 78 is in excellent condition, with most of its original seams.


One of the first orders of business, once I decided I wanted to make this hood, was to figure out my fabric.  I found this far more difficult than I expected...first thinking of (and discarding the idea) using a beautiful light grey wool, interlined with a heavier grey wool--this was not a real option, since there is no evidence of D10606 being lined.  Following that was the option of a heavy wool in another colour (the same I used for my frock coat), or the light grey wool of an old army blanket.  Eventually, after much discussion with other artisans on Facebook, and some research into the dyes used in Herjolfsnes, I decided on the fabric below.